Description

When you meet the Rocker C for the very first time, it's hard to believe that it's a standard model. Its radical lines, sculpted feel and low-rider style leave little doubt that this bike comes from a reputable tuning shop. In 2008, the specialist in full-throttle experience is celebrating its 105th birthday with new CVO models, a new Dyna Fat Bob and two completely novel bikes: the Rocker and Rocker C. This is the Rocker C!Miles: 3,243DIMENSIONSLength: 95 in. (2413 mm)Overall Width: 35.10 in. (891.54 mm)Overall Height: 46 in. (1168.40 mm)Seat Height:Laden: 25.25 in. (641.35 mm)Unladen: 27.48 in. (697.99 mm)Ground Clearance: 5.10 in. (129.54 mm)Rake (steering head): 36.5Fork Angle: 37.5Trail: 6.20 in. (157.48 mm)Wheelbase: 69.20 in. (1757.68 mm)Tires (Dunlop Harley-Davidson Series, bias blackwall front and radial blackwall rear):Front: D407 90-90-19Rear: D407 240-40R18Fuel Capacity (warning light at approximately 1 gal.): 5 gal. (18.93 L)Oil Capacity (w-filter): 3.50 qts. (3.31 L)Transmission Capacity: 1 qts. (0.95 L)Primary Chain Case Capacity: 1 qts. (0.95 L)Weight:As Shipped: 686.30 lbs. (311.30 kg)In Running Order: 720.69 lbs. (326.90 kg)Gross Vehicle Weight Rating: 1175 lbs. (532.97 kg)Gross Axle Weight Rating:Front: 415 lbs. (188.24 kg)Rear: 760 lbs. (344.73 kg) ENGINEEngine: Air-cooled, Twim Cam 96BValves: Pushrod-operated, overhead valves with hydraulic, self-adjusting lifters; two valves per cylinderBore x Stroke: 3.75 in. (95.25 mm) x 4.38 in. (111.25 mm)Displacement: 96 cu. in. (1584 cc)Compression Ratio: 9.2:1Fuel System: Electronic Sequential Port Fuel Injection (ESPFI)Air Cleaner: Fiber element, washableLubrication System: Pressurized, dry-sumpDRIVETRAINPrimary Drive: Chain, 34-46 ratioFinal Drive: Belt, 32-66 ratioClutch: 9-plate, wetTransmission: 6-Speed Cruise Drive2008 Harley-Davidson FXCWC Rocker CCHASISFrame: Mild steel, tubular frame; rectangular section backbone; stamped, cast, and forged junctions; forged fender supports; MIG weldedSwing Arm: Mild steel, elliptical tube sections, forged junctions; MIG weldedFront Forks: 49 mm telescopicRear Shocks: Hidden, horizontal-mounted, coil-overWheels: Polished 5-Spoke Cast AluminumFront: 19 in. x 2.15 in. (482.60 mm x 54.61 mm)Rear: 18 in. x 8 in. (457.20 mm x 203.20 mm)Brakes:Caliper Type: 4-piston front and 2-piston rearRotor Type (diameter x width): Patented, uniform expansion rotorsFront: 11.50 in. x .20 in. (292.10 mm x 5.08 mm)Rear: 11.50 in. x .23 in. (292.10 mm x 5.84 mm)Suspension Travel:Front Wheel: 5 in. (127 mm)Rear Wheel: 3.40 in. (86.36 mm) PERFORMANCEEngine Torque (per SAE J1349):North America: 87.90 ft. lbs. @ 2750 rpm (119.19 NM @ 2750 rpm)World: 84.80 ft. lbs. @ 3200 rpm (114.99 NM @ 3200 rpm)Japan: 81.60 ft. lbs. @ 2750 rpm (110.65 NM @ 2750 rpm)Lean Angle (per SAE J1168):Right: 32.5Left: 29.5Fuel Economy(EPA urban-highway test): 35-54 mpg (6.72-4.36 L -100 km)